🚚 Free Worldwide Shipping on All Orders!Shop Now
1 / 7
+2
PRP Can-Am Maverick X3 Seat Mount and Slider Kit Pair
PRP Can-Am Maverick X3 Seat Mount and Slider Kit Pair
PRP’s Seat Mount and Slider Kit for the Can-Am Maverick X3 and Maverick R allow you to install your favorite PRP Seats into your UTV. Rather than just a simple adapter mount this is an entire new rail system with more height adjustments, and includes our dual locking seat sliders.
A common complaint on the X3 is that the seat sliders start to get stuck after dirt and dust gets into the wheels. So we’ve added in our own slider kit that has been tried, tested, and proven over the last 20 years in all sorts of off-road environments. Our dual locking sliders provide more security and stability. Both the right and left sides of the sliders have locking mechanisms to keep them in place during hard impacts.
These seat mounts allow for an enhanced range of adjustability, allowing the seats to get as low as they can possibly go. You have the ability to set the height and depth of the mounts to get the perfect position for each rider. Creating better comfort, and confidence behind the wheel.
The flat base mounts are lower than the stock rails, and have an offset mounting point in the front. So you can flip the mounts down if you want to be lowered an inch, or flip them up if you want to raise the seat height an inch. The mounts use the existing mounting points in the cab, which allow you to raise or lower the seat in the front and back to adjust the seating angle. At the lowest settings with the mounts flipped down, you can sit about 3″ lower. This mount is perfect for those with lowered cages.
For Maverick R owners this the only mount that we recommend using. The passenger side of the Maverick R has a glove compartment that sticks out farther, making it harder for taller passengers to fit comfortably. This seat mount and slider kit allows you to adjust seat farther back, and adjust the recline angle to get more legroom on the passenger side.
Features:
- Perfect Fit for Maverick R & X3: Custom-designed for the tight spaces on the passenger & driver side, ensuring seamless installation even with the extended glovebox.
- Enhanced Legroom for Maverick R Passengers: Adjusts seat position and recline angle to create additional legroom, particularly on the passenger side with the extended glovebox.
- Lowered Ride Height: Allows you to sit up to 3″ lower than stock, ideal for lowered cages, providing a more aggressive stance and improved headroom.
- Maximum Comfort & Control: Enhanced adjustability for both height and depth, offering personalized seating positions for better comfort and confidence.
- Dual Locking PRP Sliders: Tested sliders with dual locking mechanisms on both sides, providing increased security and stability during hard impacts.
- Complete Rail System Replacement: Replaces the OEM slider rails entirely, offering more height adjustments and reliable performance in dirt and dust conditions.
- Compatibility: Works with any PRP UTV Seat featuring flat straps on the bottom frame.
Compatibility:
- These mounts work with any PRP UTV Seat with Flat Straps on the bottom frame.
Fitment:
- Can-Am X3, Can-Am X3 MAX (Front & Rear), Can-Am Maverick R, Can-Am Maverick R MAX
Additional Information:
- Weights: 15lbs
- Dimensions: 22 x 16 x 6in
PRP Can-Am Maverick X3 Seat Mount and Slider Kit Pair
PRP’s Seat Mount and Slider Kit for the Can-Am Maverick X3 and Maverick R allow you to install your favorite PRP Seats into your UTV. Rather than just a simple adapter mount this is an entire new rail system with more height adjustments, and includes our dual locking seat sliders.
A common complaint on the X3 is that the seat sliders start to get stuck after dirt and dust gets into the wheels. So we’ve added in our own slider kit that has been tried, tested, and proven over the last 20 years in all sorts of off-road environments. Our dual locking sliders provide more security and stability. Both the right and left sides of the sliders have locking mechanisms to keep them in place during hard impacts.
These seat mounts allow for an enhanced range of adjustability, allowing the seats to get as low as they can possibly go. You have the ability to set the height and depth of the mounts to get the perfect position for each rider. Creating better comfort, and confidence behind the wheel.
The flat base mounts are lower than the stock rails, and have an offset mounting point in the front. So you can flip the mounts down if you want to be lowered an inch, or flip them up if you want to raise the seat height an inch. The mounts use the existing mounting points in the cab, which allow you to raise or lower the seat in the front and back to adjust the seating angle. At the lowest settings with the mounts flipped down, you can sit about 3″ lower. This mount is perfect for those with lowered cages.
For Maverick R owners this the only mount that we recommend using. The passenger side of the Maverick R has a glove compartment that sticks out farther, making it harder for taller passengers to fit comfortably. This seat mount and slider kit allows you to adjust seat farther back, and adjust the recline angle to get more legroom on the passenger side.
Features:
- Perfect Fit for Maverick R & X3: Custom-designed for the tight spaces on the passenger & driver side, ensuring seamless installation even with the extended glovebox.
- Enhanced Legroom for Maverick R Passengers: Adjusts seat position and recline angle to create additional legroom, particularly on the passenger side with the extended glovebox.
- Lowered Ride Height: Allows you to sit up to 3″ lower than stock, ideal for lowered cages, providing a more aggressive stance and improved headroom.
- Maximum Comfort & Control: Enhanced adjustability for both height and depth, offering personalized seating positions for better comfort and confidence.
- Dual Locking PRP Sliders: Tested sliders with dual locking mechanisms on both sides, providing increased security and stability during hard impacts.
- Complete Rail System Replacement: Replaces the OEM slider rails entirely, offering more height adjustments and reliable performance in dirt and dust conditions.
- Compatibility: Works with any PRP UTV Seat featuring flat straps on the bottom frame.
Compatibility:
- These mounts work with any PRP UTV Seat with Flat Straps on the bottom frame.
Fitment:
- Can-Am X3, Can-Am X3 MAX (Front & Rear), Can-Am Maverick R, Can-Am Maverick R MAX
Additional Information:
- Weights: 15lbs
- Dimensions: 22 x 16 x 6in
$110.25
Original: $314.99
-65%PRP Can-Am Maverick X3 Seat Mount and Slider Kit Pair—
$314.99
$110.25Description
PRP Can-Am Maverick X3 Seat Mount and Slider Kit Pair
PRP’s Seat Mount and Slider Kit for the Can-Am Maverick X3 and Maverick R allow you to install your favorite PRP Seats into your UTV. Rather than just a simple adapter mount this is an entire new rail system with more height adjustments, and includes our dual locking seat sliders.
A common complaint on the X3 is that the seat sliders start to get stuck after dirt and dust gets into the wheels. So we’ve added in our own slider kit that has been tried, tested, and proven over the last 20 years in all sorts of off-road environments. Our dual locking sliders provide more security and stability. Both the right and left sides of the sliders have locking mechanisms to keep them in place during hard impacts.
These seat mounts allow for an enhanced range of adjustability, allowing the seats to get as low as they can possibly go. You have the ability to set the height and depth of the mounts to get the perfect position for each rider. Creating better comfort, and confidence behind the wheel.
The flat base mounts are lower than the stock rails, and have an offset mounting point in the front. So you can flip the mounts down if you want to be lowered an inch, or flip them up if you want to raise the seat height an inch. The mounts use the existing mounting points in the cab, which allow you to raise or lower the seat in the front and back to adjust the seating angle. At the lowest settings with the mounts flipped down, you can sit about 3″ lower. This mount is perfect for those with lowered cages.
For Maverick R owners this the only mount that we recommend using. The passenger side of the Maverick R has a glove compartment that sticks out farther, making it harder for taller passengers to fit comfortably. This seat mount and slider kit allows you to adjust seat farther back, and adjust the recline angle to get more legroom on the passenger side.
Features:
- Perfect Fit for Maverick R & X3: Custom-designed for the tight spaces on the passenger & driver side, ensuring seamless installation even with the extended glovebox.
- Enhanced Legroom for Maverick R Passengers: Adjusts seat position and recline angle to create additional legroom, particularly on the passenger side with the extended glovebox.
- Lowered Ride Height: Allows you to sit up to 3″ lower than stock, ideal for lowered cages, providing a more aggressive stance and improved headroom.
- Maximum Comfort & Control: Enhanced adjustability for both height and depth, offering personalized seating positions for better comfort and confidence.
- Dual Locking PRP Sliders: Tested sliders with dual locking mechanisms on both sides, providing increased security and stability during hard impacts.
- Complete Rail System Replacement: Replaces the OEM slider rails entirely, offering more height adjustments and reliable performance in dirt and dust conditions.
- Compatibility: Works with any PRP UTV Seat featuring flat straps on the bottom frame.
Compatibility:
- These mounts work with any PRP UTV Seat with Flat Straps on the bottom frame.
Fitment:
- Can-Am X3, Can-Am X3 MAX (Front & Rear), Can-Am Maverick R, Can-Am Maverick R MAX
Additional Information:
- Weights: 15lbs
- Dimensions: 22 x 16 x 6in
